Handheld Metal Laser Welding Machine Manufacturers In India- Meera Lasers

Laser Plastic Welding

This technique requires one part to be transmissive to a laser beam and either the other part absorptive or a coating at the interface to be absorptive to the beam. The two parts are put under pressure while the laser beam moves along the joining line.
The beam passes through the first part and is absorbed by the other one or the coating to generate enough heat to soften the interface creating a permanent weld.
Semiconductor diode lasers are typically used in plastic welding. Wavelengths in the range of 808 nm to 980 nm can be used to join various plastic material combinations. Power levels from less than 1W to 100W are needed depending on the materials, thickness, and desired process speed.

Diode laser systems have the following advantages in joining plastic materials

Cleaner than adhesive bonding
No micro-nozzles to get clogged
No liquid or fumes to affect the surface finish
No consumables
Higher throughput
Can access work-piece in challenging geometry
High level of process control

Requirements for high strength joints include

Adequate transmission through upper layer
Absorption by lower layer
Material compatibility – wetting
Good joint design – clamping pressure, joint area
Lower power density

Transparent Laser Plastic Welding

New fiber laser technology allows for the output of longer laser wavelengths, with the best results typically around 2,000 nm, significantly longer than the average 808 nm to 1064 nm diode laser used for traditional laser plastic welding.[citation needed] Because these longer wavelengths are more readily absorbed by thermoplastics than the infra-red radiation of traditional plastic welding, it is possible to weld two clear polymers without any colorants or absorbing additives. Common Applications will mostly fall in the medical industry for devices like catheters and microfluidic devices. The heavy use of transparent plastics, especially flexible polymers like TPU, TPE, and PVC, in the medical device industry makes transparent laser welding a natural fit. Also, the process requires no laser absorbing additives or colorants making testing and meeting biocompatibility requirements significantly easier.

Applications

Specific applications include sealing/welding/joining of: catheter bags, medical containers, automobile remote control keys, heart pacemaker casings, syringe tamper-evident joints, headlight or taillight assemblies, pump housings, and cellular phone parts.

Opto Communication

Pulse laser welders are electronically compatible and ideal for voltage-sensitive applications. Precision automated or manual welding construction can be performed on electronic/industrial components with a high degree of accuracy while eliminating the potential hazards of heat damage or thermal stress to complex manufacturing materials.
Laser welding also ensures a longer life of the parts. Common laser spot or laser seam welding applications include tool and die repair, complex electronic components, high-precision industrial assemblies, pressure-sensitive hermetic laser seals, and other unique applications.

Specifications

S.No	Parameters Name	Parameters Data
1.	Laser system	ND-YAG :UW 25W / 5W
2.	Energy share	3 way
3.	Work station	45 deg angular welding
4.	View	CCD Monitor
5.	Work bench size	780mmx950mmx1150

Solar Panel Welding

For flat plate solar energy collectors, the aluminium sheet and copper tube is thin, traditional welding will cause irregularity in welding depth, blemish, and destroy the covering film of the collector.
Laser welding will solve this problem for its precise locating.

Specifications

S.No	Parameters Name	Parameters Data
1.	Work station	2 Nos
2.	Output Head	2 Nos (rotate automatically, can weld X, Y direction)
3.	Welding wire diameter	0.1mm ~ 0.8mm
4.	Control	1064nm
5.	Drive	Servo Motor
6.	Travel	2350mm x1100mm
7.	Accuracy	0.05mm
8.	Size	8500mm x 2200mm x 1580mm

Pillow Welding

The Pillow Plate (or thermo plate) consists of two steel plates, connected by laser welding. After being welded together, the plate is inflated by using water pressure. The water pressure creates a specific single or double embossed profile – the pillow plate, through which the cooling or heating medium is conducted. While the thickness and the spot pattern are determined by the design pressure.

High flexibility, quality and safety

Wide range of product dimensions (max. 2000 x 8000 mm)
Wide range of product sheet tickness dimensions (0,8 / 0,8 till 2 / 20 mm)
CAD / CAM environment means easily creating new welding patterns and programs
Special software “Thermo plate Creator” for standard and new programs
Automatically measuring of laser optics by start of every weld
Automatically adjustments / change-over of machine
Communication with ERP software (automatical order input)

Electronic Laser Welding

Terminal (negative and positive) are the two parts connecting between connector and circuit. It can also be welded to make a module or pack in a certain design. These parts should also be well handled to have good current transmitting property. Therefore, fiber laser/hybrid wave welding is the best.

Tailor Blank Welding

Tailored blanks are semi-finished parts, which are typically made from sheets with different alloys, thicknesses, coatings, or material properties. After joining, these will be subjected to deep drawing or stamping.

Tailored blanks are used to make items such as door panels which are thick near the hinges and thin near the lock to withstand different types of loads or corrosion attacks.
They are lighter and often cheaper than conventional sheets. Tailored Blanks are typically made from steel. Aluminium and dissimilar material tailored blanks are also available but less common.

Tailor Welded Blanks (TWB) are welded from different sheets in the butt joint configuration. This is normally achieved by laser welding.

Laser beam welding (LBW) is a welding technique used to join pieces of metal or thermoplastics through the use of a laser. The beam provides a concentrated heat source, allowing for narrow, deep welds and high welding rates. The process is frequently used in high-volume applications using automation, such as in the automotive industry. It is based on keyhole or penetration mode welding.

Advantages:

Along with cost reduction, weight reduction, and increased performance, there are many advantages to using tailor welded blanks.

Meet CAFE targets. A 25% vehicle weight reduction results in 20% reduction in fuel consumption.
Optimized crash performance through the use of high-strength materials.
Optimized material utilization through efficient nesting.
Lower capital costs for tooling and assembly lines through part number reduction.
Reduced product design costs due to part consolidation.
Elimination of overlapping joints improves corrosion behavior.

3D Nonmetallic Laser Cutting

The system concept of the JENOPTIK-VOTAN BIM series is based on a beam guide inside the robot. This allows using CO2 lasers with a power of up to 5 kW without having to use a complex external beam guide that often causes collisions. At the same time, the equidistant beam path prevents the laser beam from pumping, ensuring a stable beam quality.

This approach makes the Jenoptik system an optimized tool for cutting all 3D plastic parts of a vehicle, for example, inner doors or bumpers. Due to its high flexibility, JENOPTIK-VOTAN BIM is the ideal, virtually wear-free tool for processing a variety of working parts even if you have only one laser machine so because you don’t need the special cutting dies as during conventional processing.

Fast and Reliable Plastics Welding with JENOPTIK-VOTAN W:

In order to expand the applications of laser beam welding, Jenoptik has developed a welding technique with free radiating diode lasers. Diode lasers have been used as pump sources in disk lasers for years and are used by Jenoptik as direct emitters, too.

They provide the following characteristics:

Very high efficiency, since no loss through fiber coupling.
High power output of up to 120 W per module.
High reliability and long lifetime of more than 20,000 operating hours.
Standard wavelengths of 808 to 980 nm.
Flexible scaling with favorable price-performance ratio.
Compact and robust design.

ND YAG Cutting

YAG 500W Sheet Metal Laser Cutting Machine integrates optical, mechanical, and electricity in one, which adopts laser, computer control technology, and a high-performance CNC laser power system. The CNC laser cutting machine is applied to cut stainless steel, carbon steel, alloy steel, spring steel, aluminum, silver, copper, titanium, and some metal plate and pipe.

Widely used in sheet-metal structure, high-low-voltage electrical cabinet production, hardware, knife-volume, production of advertising signs, metal crafts, decoration aviation, mechanical parts, electrical meter, sawblades, spring-chip, and other industries.

Features:

The outside sliding guide ensures fast processing speed, which is especially suitable for the garment and leather industries.
Being integrated with a more concise frame, this machine is more economical but still has the same excellent cutting and engraving effects.
Our three unique protection functions, i.e. anti-interference function, water-protective function, and power cut-off function ensure longer working life, stability, and effectiveness.
The stainless steel honeycomb platform we adopt, which is breakage-proof, ensures stable focus distance thus good cutting and engraving quality.
Original Singapore imported lens with molybdenum base makes the equipment produce smaller facula and stronger cutting force, greatly improving working efficiency and reducing cost.
Exhausting, absorbing, and assistant blowing systems solve the problem that troubles the laser equipment manufacturing industry for years, extending the life of the laser tube
This machine uses a USB port to transmit data, equipped with large-capacity internal memory, improving working speed and efficiency greatly.

Specifications

S.No	Parameters	Range
1.	Medium of Laser	Nd: YAG
2.	Laser Output Power	500W
3.	Cutting area(mm) (length × width):	3000mm×1500mm
4.	Max cutting speed(m/min)	8 m/min, 10 m/min
5.	Cooling way	Water cooling
6.	Pulse Repeated Frequency	0-300Hz
7.	Min Line Width	0.12mm
8.	Laser Wavelength	1064nm
9.	Working Power	380V/50Hz/50A
10.	Continuous Working Time	24 hours
11.	Weight	3000kg
12.	Outline Size(mm)	4270mm×2480mm×1400mm (length×width×height)

Tube Laser Cutting

It incorporates space-saving design and ease of use. Its high cutting speed and very low operating cost make it the most affordable system on the market. The Laser system can cut both framed and frameless stencils, without requiring any changeover. The lightweight motion system allows excellent positioning accuracy while maintaining cutting speeds that are the highest in its class.

Main Features:

Efficient cutting of square and rectangular sections with a sliding way mounted cutting head.
The cutting head construction with hardened and ground helical gears and automatic backlash compensation guarantees longer blade life and its full exploitation, low noise levels, and the very best cut quality.
The optimum working parameters for the best possible machine performance, from a complete and proven technological database covering blade speeds and feeds for differing materials, saw blade selection, and material feed.
The material feed system and vice geometry assure the most positive clamping of the material during the cutting cycle whether the material is a thin wall delicate tube or tough thick wall tube.
During the material feeding process, the material is lifted away from the vice bed and vice jaws to prevent the material surface from being marked or scratched.
Blade life, even under arduous cutting conditions, is much improved by micro-lubrication and by turbo-refrigeration.
Cutting line has been designed to operate either as a stand-alone system or fully integrated with a complete automatic line controlled by one CNC programming unit integrating all additional deburring, washing, drying, and collecting operations.

Specifications

S.No	Parameters	Range
1.	Wavelength	1064 nm
2.	Output power	150-250W
3.	Power supply	380V +/- 15% 50/60 Hz 3ph – 9 KW
4.	Dimensions	1270x2100x2173h mm
5.	Working Area	600x600x400h* mm
6.	Repeatibility	+/- 0,02 mm
7.	Cooling System	Water
8.	Weight	1200 Kg

2D Laser Cutting

Main Features:

Adopt cantilever flying optics structure. It is available to load and unload from three directions. Very good operator-machine access ability. Sheet material over 3meter by 1.5meter can also be put on the table.

With fiber lasers, the beam quality is great, the cutting efficiency is high with low consumption, the machine is stable and easy to maintain.
Adopt a single drive to avoid the difference error caused by double drive, so the cantilever is stable and the beam is stable, the cutting precision is high.
Adopt the high rigidity aluminum alloy crossbeam(Y axle) analyzed with self-owned intellectual property rights, the weight is light so the movement of the y axle is great.
Adopt a centralized lubricating device controlled by the control system to automatically lubricate the transmission parts so that the living lives and the precision of the transmission parts are protected.
Used auto-focusing adjustment system to automatically reset the focusing point when cutting different sheet material, the efficiency is improved greatly
It is available to cut high reflective material such as aluminum, and brass
The machine is fully closed for protecting the safety of the operators
Adopt a FAGOR8070 control system with great stability and reliability.

Specifications

S.No	Parameters	Range
1.	Working Area	3000mm×1500mm
2.	X Axis Travel Distance	3030mm
3.	Y Axis Travel Distance	1520mm
4.	Z Axis Travel Distance	105mm
5.	Power of Fiber Laser	500W – 4000W
6.	Accuracy	±0.05mm
7.	Repeatability	±0.02mm
8.	Ideal speed	100m/min
9.	Max cutting speed	60m/min
10.	Acceleration (X, Y axle)	1.5g

CO2 laser brings sophistication in high-speed laser cutting onto a new level, creating enhanced production with superior speed, accuracy, and part quality. CO2 lasers are designed by using innovative linear drive motor technology to allow maximum speeds, even in small notches or narrow contours.

It provides previously unseen high-speed performance concerning machining dynamics, contour accuracy, and process safety. Finn-Power L6 will process sheet sizes up to 1565 mm x 3074 mm. With 4 kW or even 5kW of laser power, it enhances laser cutting for various material thicknesses and material types.

The rigid machine frame provides a solid base for stable beam delivery optics and a high-speed drive system. This unique frame design accommodates the highest acceleration and deceleration rates without compromise.

HIGH POWER CO2 laser has a compact design with the resonator and CNC built into the structure. The positioning of the shuttle tables is possible on two sides of the machine. This is beneficial when plant layout or production flow requires system layout flexibility.

Main Features:

CadCam Software
Laser source (Resonator)
CE safety equipment
High-pressure cutting option (25 Bar)
Central lubrication
Tropical Level Cooling unit
Scrap collector
Shuttle table (Automatic pallet changer)
Filter
Special laser cutting options
Sharp corner overheat protection (Speed-Power modulation)
Fast follow property of the head for high precision
Simple user interface parameter page (Power-speed-pressure combination)
Sheet identification and detection system (Ref. Point)
Two Cutting Heads: 5”, 7,5”
Exchangeable Lens Holder System for Different Focal lengths (1,5” lens)
Under Table Small Part & Scrap Conveyor

Specifications

S.No	Parameters	Range
1.	Work Size	60″ x 120
2.	Repeatability	0.001″
3.	Positioning Accuracy	+/0.004″ per 120″ of travel
4.	Positioning Speed	7900ipm, combined axis
5.	Laser Power	2.0kw / 2.5kw / 4.0kw / 6.0kw
6.	Controller	SINUMERIK 840D
7.	Lens	5″ and 7.5″ FL quick cartridge
8.	Table	Dual shuttle type pallets

5 Axis CNC Automation

The laser optics and CNC (Computer Numerical Control) are used to direct the material or the laser beam generated. A typical commercial laser for cutting materials involved a motion control system to follow a CNC or G-code of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish. Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.

Characteristics:

Equipped with a zero-offset design processing head Increased corner speeds allow for high-speed processing
Reduced setup and cutting times decrease total production time while maximizing productivity.
User-friendly Teach Box reduces setup time before processing, as it effectively teaches and corrects programs on 3D preformed parts.
Equipped with a new control unit that doubles axis rotation speed and increases cutting speed, reducing total production time by up to 40%.
Dross Reduction (DR) control optimizes output power and reduces dross adhesion. This produces parts with little need for post-processing deburring.
High-performance multi-axis lasers with faster cutting speed and increased thickness capacity High pressure assist gas and optimum gas flow provide the ability to process stainless and aluminum alloys 2 times faster than the previous model.
Nitrogen-assisted cutting has more than doubled the maximum thickness of stainless steel compared to previous models, enhancing the cut quality on thick materials.
New control unit delivers improved operability.
Advanced 15″ touch panel provides an efficient and easy-to-use operator interface.

Specifications

S.No	Parameters	Range
1.	Laser Wavelength	1070-1080nm
2.	Laser Generator	Fiber laser
3.	Freedom of motion in space	5 axis
4.	Positioning	Red light
5.	Laser Power	500W
6.	Continuous Working Time	24 hours
7.	Max. Cutting Thickness	≤ 6 mm(According to materials and auxiliary gas)
8.	Laser Power Stability	≤ ± 3 %
9.	Pulse Width	0.1~20 ms
10.	Cooling	Water Cooling

Packing laser marking

CO2 laser marking machine with CE & SGS adopting originally imported USA CO2 Radio Frequency Metal Laser Module and Power Supply. Low processing cost, no consumable parts. Marking speed can be adjustable and marking results on Lenses (transparency) can be adjusted due to the laser power. This series laser marking machine is our general and mature model with optimized controlling software and easy operation (human-friendly control). And it can be customized according to customers’ demands.

Specification:

Laser Power	30WLaser
Wavelength	1060 nm
Laser Source	Co2 Laser
Repetition Accuracy	±0.002 mm
Min Line width	0.01 mm
Linear Speed	<8000 mm/max
Marking Size	70 x 70mm
Overall Dimension	Static 60x80x135cm / Fly57 x 66 x 155 cm
Power Supply	220V/50Hz/5A/1P
Overall Power	300 W
Cooling System	Built-in Air Cooling
Operation System	Win 7/Win XP/ Professional Marking Software Page

Uv Laser Marking Machine

Specifications:

Optical parameter
Wavelength	< 355nm
The output power	3W 5W 10W optional
Laser isolator	Built-in
Frequency adjustable range	1-120kHz
Marking parameters
Maximum speed	2500mm/s-20000nm/s
Positioning accuracy	0.001mm
Repeatability	0.002mm
Optical output characteristic
Marking wide	110×110/175×175/220×220/330×330
Minimum line width	0.01mm
Minimum character height	0.1mm
System property
The power supply	AC 220V/50Hz
Range of focal length adjustment	500mm
Operating temperature	0-40℃

Plastic Laser Welding Machine

Plastic Projection Welding

Projection welding is usually performed using a special band of near-infrared lasers, which can travel through most colourless polymer materials. The welding process occurs on an overlapping lap structure: a suitable colouring (absorption) layer is superimposed under a transparent thermoplastic layer. The laser beam passes through the first layer of material, and the absorption layer at the junction of the two layers absorbs the laser beam radiation and completes the welding.

Application fields

Automobile industry, Pharmaceutical industry, Microfluidics industry, Packaging industry, Communication industry

Advantages of Plastic Transmission Welding

High speed (up to several meters per second) high quality, high precision, high consistency joint sealing, high mechanical strength, no contact, no mechanical stress and wear, small thermal impact area, beautiful appearance without welding slag, less welding slag, good joint quality, less gas escape.

Laser Drilling

Applications:
With laser drilling, the impossible becomes possible. This manufacturing method creates microscopic features that no other form of technology can deliver.

Laser Light drilling applications include:

• Drilling in polyethylene laminate discs for life sciences applications

• Micro holes and portals for wire routing in surgical and cardiovascular delivery catheters

• Micropore arrays in flat sheets for cardiovascular embolic filters

• Hole drilling for peripheral vascular drug delivery catheters

• Hole drilling for optical biosensors used for in-vitro diagnostics

• Drilling for embolic filters in medical devices

• Flow holes for oxygen regulator devices

• Laser drilling orifices in injection-molded, disposable parts for medical devices

• Microelectronic orifice plates for inkjet printers
• Laser micro via drilling for microelectronic parts

Laser Drilling Methods:

The most basic laser drilling method has several variations, those are:

1. Single Pulse Drilling
2. Percussion drilling
3. Trepanning
4. Helical Drilling

Metal Laser Drilling:

Metal drilling is an important application to many industries including automotive, aerospace, medical device manufacturing, electronics, and semiconductor manufacturing. The laser drilling process can be used on a variety of metals, including nickel alloys, copper alloys, aluminium alloys, titanium alloys, stainless steel, and brass.

Advantages:
• Flexible hole size and shape
• Non-Contact Process
• On-The-Fly Processing
• Taper Control

Depending on the specific application, different laser wavelengths (Min 355 nm to max 1064nm) with different pulse durations can be used to create the desired holes in your metal parts.

Sample Images:

Plastic Laser Drilling:

Laser technology has many advantages over traditional drilling methods. It enables very precise drilling, avoids any mechanical contact with plastic parts and allows you to quickly and easily switch between hole sizes and shapes.Shorter wavelength beams are typically used in the laser drilling process when working with plastics and polymers, as shorter wavelengths have enough energy to break the polymer bonds in the chains.

Advantages:

• The laser drilling offers reliability of drilling
• Safety
• Quality
• Flexibility

Sample Images:

3D laser Cutting machine

Applications of 3d Laser Cutting
• Metal fabricators
• Original Equipment Manufacturers
• Graphic Designers
• Aerospace Industry
• Railway Industry
• Automobile Manufacturing

Technical Specifications:

Technology	3D laser
Material	for metal
Product handled	for tubes, railways
Robot Axis	3,6, and 7 Axis robot
Laser Type	Fiber
Control type	CNC
Associated function	tapping
Other characteristics	automatic, 3D, high-productivity
X travel	8,790 mm (346 in)
Y travel	1,270 mm (50 in)
Cutting speed	24,000 mm/min, 30,000 mm/min (15.748 in/s)
Laser power	2,500 W, 4,000 W
Tube diameter	Max.: 406 mm (16 in), Min.: 20 mm (1 in)

Laser Peening

Laser Peening is a process in which a laser beam is pulsed upon a metal surface, producing a planar shock wave that travels through the workpiece and plastically deforms a layer of material. The depth of plastic deformation thus resulting in compressive residual stress is significantly deeper than possible with most other surface treatments.

Laser energy can be used to induce residual compressive stress deep into the metal’s surface layer. The Laser Peening process employs laser-induced shocks to create compressive residual stress of over 0.040 inch (1 mm) deep with magnitudes comparable to shot peening. This provides a damage-tolerant component that is more resistant to various forms of stress-related failures.

Laser Peening typically provides 4x or more the depth of residual compressive stress obtained by shot peening. Deeper levels of compressive stress provide greater resistance to fatigue and corrosion failure.

laser hardening

This makes Laser hardening cleaner and more readily mobilised than traditional heat treatments.

Any ferrous metal (steel or cast iron) which would normally be hardened by more traditional methods like flame or induction hardening, can be hardened with a Laser. Laser hardening is more versatile than flame hardening ore induction hardening.

Laser hardening provides reliable, repeatable, non-contact and energy-efficient heat in a minimalamount of time. For hardening, laser beam provides the necessary control and accuracy tofocus the heat to a specific area of the part. The laser is suitable for the integration in alreadyexisting manufacturing equipment’s and production lines.

Apart from the traditional hardening process, laser hardening offers a range of applications for tasks which couldn’t be solved hitherto optimally for example for components with special forms and special functional surfaces (survey of the hardening tracks):

Selective hardening of single work piece surfaces. Here a selective hard surface arises with a tough center and uninfluenced areas in the direct neighborhood.
Hardening tracks at cutting edges, guide tracks, grooves and free mould surfaces withcontinuous crossing geometry
Good hardenability of surfaces which are difficult to reach such as craned grooves, flutesand interior surfaces
Dot hardening at naps and in blind holes
Hardenability of thin, warp-prone parts by a selective, quick heat input at an extremely shortdwell time.

LASER CLADDING MACHINE

Laser hardening is a method aimed at improving component wear behaviour.

During laser hardening, also known as surface layer hardening, the energy from the laser beam is applied directly to the component surface. The surface layer is heated up to the hardening temperature (>1000°C) in a reduced area within a very short time.

One advantage of using a laser is that the amount of heat input is comparatively low, so heat is transmitted into the base material relatively quickly. Self-quenching is produced as a martensitic structure is formed and the hardening layer is ‘cooled.’

A very tough, fine-grained structure is created thanks to the high heat-up rate during laser hardening. The risk of cracks forming is very low thanks to self-quenching. The precisely focused energy ensures that the component is subject to a comparatively low impact from heat, bringing a great advantage in minimum quench distortion.

Laser Cleaning Machines

Cleaning with a laser is precise and it comes with high repeatability. The dry and touchless process does not damage the underlying substrate and eliminates the use of hazardous and expensive consumables such as chemicals or blasting media.

Laser cleaning with JET LASER provides tire manufacturers with unique advantages:

a. Damage-free removal of surface coatings
b. Dry process without hazardous chemicals
c. Rugged and compact award-winning design
d. Designed for harsh operating environments

Benefit from our years of experience in bringing laser cleaning technology to tire factories worldwide

Glue Laser Cleaning

Features
1. Glue removal software automatically adapts to matching circuit, high-resolution CCD for automatic positioning.

2. No-contact positioning and processing for no pollution, no damage to materials.

3. Lower operating cost, convenient maintenance, no consumables, and automatic operation to save time and effort.

4. Stable performance on CCD chip’s glue cleaning (micron accuracy), no damage on the substrate.

5. Adapts to coaxial vision positioning technology and visual programming help to achieve the WYSIWYG processing method.

6. Mirror finish, stainless steel cover, efficient fume filtering system, works properly in the dust-free workshop.

7. Built-in smoke and dust purifier to collect smoke and dust during work to achieve zero pollution and zero-emission.

8. Automatic loading and unloading system, less labour cost.

Model	LCD200-A
Laser type	Infrared laser
Working area(mm)	100×100
Graphic format supported	PLT，DXF
Working enviroment	10-35℃
Equipment power(Kw)	＜10
Laser processing accuracy(mm)	± 0.02
Supply voltage	220V/50Hz

PCB FPC Laser Processing Machine

Features
1. Professional laser cutting software for PCB industry, and easy for operation; The MES system customization and seamless docking of the production line can be realized.

2. Imported laser source and optics system to ensure the machine’s long-term stable performance.

3. CCD module helps to achieve auto-positioning cutting.

4. Optional with linear motor and marble platform to achieve the high precision requirement.

5. Multiple platforms with more functions, honeycomb adsorption platform is standard.

6. PCB board transmission track is optional and is a perfect match for the SMT assembly line.

7. FPCB processing platform is optional.

Model	MS0404-V-B
Laser power(W)	UV Laser:10~20W Green laser:30W
Working area(mm)	400X400
Spot size	＜20μm
Accuracy	±20μm
Dimension (mm)	1300 X 1100 X 1750
Weight(Kg)	1200
Supply voltage	AC220V±10%，50/60Hz
Working environment	Temp: 15~30°C,humidity: 5~85%, no condensation, no dust.
Gross power(Kw)	6

Die Board laser Cutting

This machinery configuration consists of a moving table along the two X and Y axis and a fixed head that guarantees constant cutting on the entire surface being machined.

Advantage of this Die Board laser cutting machine:

1. The machine is configured with a travelling table and stationary gantry design, to provide a rigid and stable platform as well as a small floor space.

2. The machine is utilizing an imported PA laser dedicated CNC control system, which is combined from laser and machine control systems. The control system is developed on the Windows operating system with the excellent developing capacity of CNC and PLC, following the most advanced process. The control system is supplied with a laser die-board process database, machine operation function, laser operation function, remote diagnose function, and so on.

3. The machine is capable of cutting different slit widths in one drawing. This silt width is controlled by the potential button on the operation interface to have multiple silt widths in one cut.

4. A specialized machining process package is supplied with the machine, it is very convenient to use or modify the different machine parameters corresponding to different slit widths or different thicknesses.

5. Each machine includes the proprietary laser machining technology, the High-speed response Laser Power Slope adjusts the switch light-spot, tool path compensation, leapfrog movement, repositioning, and retracting machining.

6. The machine is configured with a three directions optical design, available for different customer environments. The machine has an enclosed optical path and positive pressure dust removal, to ensure the long life of the lens.

Technical Specifications

Laser Type	Sealed CO2 laser Tube
Laser Power	60W,80W,100W,130W,150W,200W (optional)
Engraving Area	900×600mm, 1200×900mm, 1300×900mm, 1600×1000mm and small or Big for your choose
Engraving Speed	0-60000mm/min
Resetting Position accuracy	±0.05mm
Working Voltage	AC110-220V ±10%.50-60HZ
Power	<1,000W
Operating Temperature	0-45°C
Operating Humidity	5-95%
Minimum Shaping character	English 1×1mm
Graphic Format supported	BMP, PLT,DST, DXF and AI
Driving System	Stepper
Cooling Mode	Water-cooling and protection system or choose industry chiller cw3000 cw5000 cw5200
Auxiliary Equipment	Exhaust-fan, Air-exhaust pipe
Controlling Software	DSP Control system
Compatible Software	CorelDraw, Auto CAD, Photoshop

Airbag Laser Cutting Machine

Features
1. RofinDC series high power CO2 laser generator, stable performance, high-density light spot, low maintenance cost, and long service life.

2. Gantry & rack and pinion & double servo drive system, it has the advantages of high transmission efficiency, good stability, and free maintenance.

3. The unloading unit and the cutting unit are designed separately to keep the working efficiency of the unloading and cutting synchronization.

4. The semi-flying optical path system ensures the uniformity of the effect of the whole cutting

5. Simple fixed optical path design, no need to constantly adjust and maintain.

6. Distributed abstracting air structure, effectively absorbing and cutting dust particles, to realize clean and environmental cutting.

7. The whole machine adopts CNC automatic lubrication system to keep 24 hours continuous cutting;

8. SGS international certification standard, fully enclosed design, effective protection of operation safety.

Model	CMA2425C-GF-A
Working area(mm)	2500*2400
Laser power(W)	2500/3500
Maximum speed(m/min)	0-120
Maximum acceleration(G)	0.8
Positioning accuracy(mm)	±0.1/1000
Repeat positioning accuracy(mm)	±0.05/1000
Supply voltage	Three phase 380V/50Hz
Work environment	5-40℃ Humidity5- 85%, Clean,less dust
Weight(Kg)	9000
Overall dimension (mm)	960038001750

Flat Bed

Features
1.Machine body is made of reinforced welding frame, 600℃ heat treatment and vibration aging to do stress release and then under finishing milling to get high stability and to keep the deformation tolerance within ± 0.02mm;

2.High-strength aluminium alloy is adopted for the beam structure to ensure faster and smoother running.

3.Support MDF, acrylics, and the other materials cutting.

Model	CMA1325C-B-A
Working area(mm)	1325×2500
Laser power*(W)	80~180
Speed(m/min)	18
Positioning Accuracy(mm)	±0.1/1000
Repeated accuracy(mm)	±0.05/100
Work environment	Temperature 5-40℃ Humility5-80%, Clean,less dust
Supply voltage	220V/50Hz
Weight(Kg)	600
Over dimension (mm)	353018501150

Auto Feeding Laser Cutting Machine

Features
1. Isolated working area and collecting area, synchronous processing, and collecting, which not only improve the efficiency without pausing the machine but keep the operator from light path system and motion system during work, ensuring production to higher safety standard.

2.Front & back synchronous & auto-tracking material-pressed device:
The Front auto-tracking material-pressed device ensures the accuracy of feeding, and the back material-pressed device avoids material shaking during work. Even when cutting several layers of material at the same time, this device can ensure working accuracy.

3. Epsilon-type aluminum conveyor (Han’s Yueming self-owned Intelligent Property), easy for maintenance by piece with low cost.

4.Motion system adopts the design of the outer rail module, stronger structure, and easier to adjust.

5.High-quality imported motors, synchronous belt, and optical lens to ensure the machine’s stable performance.

6.Fully enclosed laser path design that complies with CE safety certification.

Model	CMA1606C-FET-FA
Working area	1500* 600 mm
Laser power	130W
Cutting speed	0~18 (m/min)
Machine dimension	2385* 2190* 1900 mm
Power Supply needed	Machine: Single phase AC220V Fan: 380V, 50/60HZ
Machine weight	980 kg
Work enviroment	Temp: 5~40℃, Humidity: 5-80% Clean, less dust

Vision Laser Cutting Machine

Features
1. The CCD camera system extracts the contour of the patterns, then the software will help to search the same pattern automatically, then do the cutting accordingly, very efficiently…

2. YM self-developed software helps to achieve the shortest cutting path, saving 10%-20% work time.

3. Adopts high-end DSP chips to ensure the software enjoys the powerful data processing ability, no deformation, and distortion for high-speed continuous curve cutting.

4. Protection system: Cover protection, emergency switch, leakage protection are available for optional.

Model	CMA1080-VT
Laser power	60W-130W
Laser head	Double
Working area	850*750 mm
Overall dimension	160013901250 mm
Weight	380 kg
Speed	0-24 m/min
Supply voltage	AC220V±10%, 50/60Hz
Working environment	Clean, less dust Temp: 5-40℃, Humidity:5-80%

Multi-head Laser Cutting Machine

Features

1. The CCD camera system extracts the contour of the patterns, then the software will help to search the same pattern automatically, then do the cutting accordingly, very efficiently.

2. YM self-developed software helps to achieve the shortest cutting path, saves 10%-20% work time.

3. Adopts high-end DSP chips to ensure the software enjoys the powerful data processing ability, no deformation, and distortion for high-speed continuous curve cutting.

4. Protection system: Cover protection, emergency switch, leakage, and protection are available for optional.

Model	CMA1610-Q	CMA1810-Q
Version	Classic
Working size	1300*1000 mm	1500*1000 mm
Laser head	Four
Laser power	60-180W（As approprite）
Max-speed	0-30m/min
Work environment	Clean, less dust Temp:5-40℃, Humidity:5%-80%
Power supply	AC 220-240V, 50/60Hz
Gross weight	430Kg	560Kg
Dimension	220018001200 mm	240018551200 mm

Double-head Laser Cutting

Features
1.The “upgrade version” machine integrates various auxiliary machine power supplies on the fuselage, unified control, all handles and door locks are ergonomically designed, and the huge auxiliary machine reserve box design on the back of the machine makes the customer’s on-site auxiliary machine placement more reasonable, fully meet the 6S management requirements.

2.Equipped with YM Laser self-developed Smart Carve Software and controller, adopts high-speed Interpolation movement algorithm to achieve high-speed and stable performance.

3.Support Ethernet(10/100M) and USB2.0 transmission.

4.Support dynamic display which will show process path and co-ordinate point, real-time work track display.

5.Support work time preview and interruptible engraving recovery after power-off.

6.Support laser spot compensation (inward contraction and outward extension), the laser cutting Path optimization can be done on software.

7.Modular design can be equipped with different functions which make a smaller size and less shipping cost.

Version	Upgraded version
Laser power	60-180W
Laser head	Double
Working speed	0~30m/min
Power supply	AC220-240V，50/60Hz
Working enviroment	Clean, less dust Temp: 5~40℃，Humidity: 5~80%

Fiber Laser Cutting

Application Industries:

Metal forming, aviation, aerospace, electronics, equipment, tunnel spare parts, automobile, grain machinery, textile machinery, engineering machinery, high precision parts, ship, metal, elevator, arts and crafts, tool processing, decoration, advertising, metal processing Such as service.

Application Materials:

Especially suitable for processing on stainless steel and iron plate, diamond blade blades work well with high hardness and brittle alloy. In the metalworking industry, laser cutting replaces CNC punching and wire cutting. In the metalworking industry, laser cutting replaces CNC punching and wire cutting. It is mainly used for laser cutting of metal plates and pipes, e.g., steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized plate, pickle plate, galvanized plate, copper, silver, silver Etc.

Tube Fiber Laser Cutting

The advantages of laser tube cutting are that it dramatically reduces production and overhead costs by virtually combining unlimited cutting configurations, eliminating intrinsic tolerances in many operations, as well as combining multiple operations in a single process step by step.

Precision Laser Cutting Machine

Features
1. Cast steel frame to ensure the machine stability and it effectively eliminates vibration during the high-speed cutting process.

2. Double ball screw & dual-motor driving system effectively improve customer’s production efficiency.

3. Automatic lubricating system and transmission parts which are free of maintenance.

4. Professional cutting software is easy to operate.

Model	CMA0606D-G-A / CMA0606D-GV-A(with camera shooting CCD)
Working area	600mm×600mm
Laser type	CO2 laser generator
Laser power(optional)	30W-100W
Transmission system	Double guide screw and gantry servo drive
Machine structure	Whole casting
Maximum speed	45m/min
Maximum acceleration	1.2G
Positional accuracy	≤±0.02mm
Reposition accuracy	≤±0.01mm
Camera system	Full-automatic
Outside optical path system	Flying optical path
lubricating system	Semi-automatic oiling
Supported format	CAD，DXF etc
Power input	Three phase 380V/50Hz/60Hz
Overall dimension	175016501456 mm
Gross weight	2000Kg
Working environment	0-40℃ Humidity≤ 80%，non-condensation

Fiber Laser Cutting

Model	Mach6025 Fiber Laser Cutting Machine
Working area	6000x2500mm
Output laser power	4000W/6000W/8000W/10000W/12000W
Transmission system	Synchronized direct driving system
Loading method	Automatic exchanging palletsHydraulic shuttle tables
Max speed	240 m/min
Accelerated speed	2.4g
Position accuracy	0.05mm （VDI/DGQ 3441）
Reposition accuracy	± 0.03mm（VDI/DGQ 3441）
Total power	21-47kw
Gross weight	17.5T
Overall dimension	15500x4200x2200mm

Fuel Tank

Dividing the production process into individual steps allows for the use of standardized modules for work piece infeed and laser processing. Interlinking different modules using a work piece transport system allows parallel production in multiple modules to take place.

The production of complex subassemblies is possible because every module can be used and configured "individually". The clamping tools are light and can be quickly interchanged, which enables the flexible production of parts. The module system not only makes provision for using more than one optics per module, but also allows for picking up parts from automated processing stations.

Leak testing stations, laser labeling stations and pallet systems can be easily integrated into the modules using the work piece transport system

Cylindrical Battery Welding

Terminals may be cold rolled steel, aluminum, or copper, depending upon the physical size of the finished battery.

The most common battery types are cylindrical lithium ion cells around the 18650 size (18 mm x 65 mm), large prismatic cells, and lithium polymer pouch cells. Each cell type has a different set of welding requirements.

MLS has recently developed a battery welding machine for Li-ion batteries. These batteries are made of prismatic containers made of materials such as Al, Alloy, and Copper. These machines are used for welding can-caps, terminals, filler tubes, tabs, etc. The components range in thickness from 0.5 mm to 3 mm..

3D Fiber Laser Cutting

Technical Specifications:

Model	MLS-3D Laser cutting
Laser Source	IPG ( Raycus for option)
Laser Power:	1000W
Laser Wavelength:	1080nm
Robot:	FANUC Robot (ABB Robotic Arm)
Driver Laser Head:	Ray tools 3D
Laser Head Repeated positioning accuracy:	0.05mm
Graphic Format Supported:	AI, PLT, DXF, BMP, DST, DWG, LAS, DXP
Installation:	Floor stand/ Inversion type / wall-mounted
Cooling system	Dual-temperature with purification system chillier

Automotive Laser Welding

Today the automotive manufacturing industry has changed for the better, as a new generation of body engineers seem to be free to consider aluminum, lightweight steels, and non-metals such as engineered plastics and composites due to onerous government requirements for fuel economy. Plastic body components are now used all over the auto world, even on premium cars like Audi.

The laser welding process exhibits good repeatability and is easy to automate. Laser welding has numerous advantages and benefits over traditional welding methods. It can reduce costs while improving production efficiency and quality.

Laser techniques have several advantages over traditional metal-joining technologies:
• Increased process speed, resulting in higher productivity
• Compact manufacturing lines with reduced floor-space requirements
• Enhanced strength of the joints
• The reduced width of the flange, resulting in reduced vehicle weight
• Greater tooling flexibility

Handheld Laser Welding Machine

Features

1. High power hardware and home appliances Portable laser welding machine, high energy density, and low heat input, small amount of heat dissipation, and melting zone and heat affected zone are short and deep.

2. High power hardware and home appliances Portable laser welding machine, high cooling rate, which can weld with excellent weld system and good joint performance.

3. High power hardware and home appliances Portable laser welding machine, compared to contact welding, eliminates the need for laser welding electrodes, reduces daily maintenance costs and greatly increases work efficiency.

4. The weld seam is thin, the penetration depth is large, the short is small, the precision is high, and the look is smooth, flat and beautiful.

5. Consumables, small size, flexible processing, low operating and no maintenance costs.

6. Laser fiber is transmitted through optics and can be used in conjunction with a pipeline or robot.

Advantages of Handheld Laser Welding

The wobble welding machine can handle the hard welding material easily, such as aluminum, brass.
The weld seam is smoother and beautiful, it doesn’t need to be polished or the work board of the polish is very small.
Handheld laser welding machine is easy to handle and needn’t to require the professional welders.
With an 8-15m fiber line, It can weld long-distance and large- area parts.
Various welding processes, such as spot welding, seam welding and overlap welding.
The welding efficiency is around 5 times of TIG welding.

Electronic Laser Welding

There are multiple ways in which this process is used in the electronics industry, such as for the welding of:

Disk drive flexures:
This is often done using precision welding
Batteries, a key component of electronics and
Sensors, featured in many new and modern electronic devices and
Semiconductors
This is an industry which uses a wealth of materials in order to create the finished end-products that we use each and every day. Perhaps the most commonly used material within this industry is metals, and more often than not metals of a different nature need to be strongly welded together.

G4 Glovebox

Machine Specifications

• Machine size : 980 x 1570 x 1050 mm
• 360° rotation of part along 2 axes
• Operator controlled
• Contamination – free powder recovery
• Solution for every kind of powder – Titanium alloys, Aluminium Alloys, Hx alloys, Stainless steel, …
• Complete visibility of the machine thanks to a transparent machine housing
• Compatible with major 3D printer manufacturers
Industrial Sectors: Railway, Medical, Luxury, Fablabs, Education, Automotive, Aerospace

Picosecond Laser Cutting Machine

Specification of picosecond laser cutting machine

Applied Range		FPC，CVL，FPC, micro-connection, ceramics, silicon and so on
System Processing Accuracy		( ZHENGYE Conditions) ±20μm
Laser power		15W@400kHz
Laser Wavelength		355nm
Pulse Width		10ps
Frequency Range		4kHz-1MHz
Objects	Large processing size	550mmX650mm
	Table number	Single beam, Dual platform
Dimensions (L×W×H)		2200mm×2150mm×1750mm
Weight		3700kg

Advantages:

1. High Intelligence

2. Cutting Efficiency

3. Faster speed

4. Slight carbonization

Kitchenware Laser Welding

Features
1.Integrated structure design, comply with majority of the laser source available in the market;

2. Low running cost, only 1~2Kw/h electricity and little nozzle cost;

3.Dual-temperature control water chiller, support both laser source and welding head, ensure long term stable operation;

4. O-type, Line-type and dot-type wobble welding types for option, swing width ranges 0~5mm;

5.Equips digital display barometer, with low pressure alarm function to help adjusting air pressure;

6.Touch screen control panel, easy for parameter adjusting, less relying on skilled welding technicians;

7.Ergonomic design welding head, optional elastic weight reducer, make it easy for long time operation.

Technical Parameter

Model	HW-A
Laser power（W）	500/1000/1500/2000
Overall dimension(mm)	1200 X 680X 1000
Weight (Kg)	120
Laser wavelength(mm)	1070
Gross power(KW)	＞1.5
Supply voltage	Single phase 220V / 50Hz / 60Hz three phase 380V / 50Hz / 60Hz
Working environment	Temp: 10~40 ℃

Jewellery Laser Marking

Specification:

Item Name	Parameter
Model	Jewellery Laser Marking
Laser Power	50W
Laser wavelength	1064nm
Laser type	Raycus/ IPG fiber laser source
Beam diameter	7mm±1
Repeat frequency	50KHz-100KHz
Pulse width	131ns
Marking depth	0.01-1mm
Marking area	110×110mm
Rated power consumption	1200W
Operating voltage	110V- 240V/50-60 Hz/15A
Cooling	Air Cooling
Packing size	884283cm (LWH)
Gross weight	60 KG

RF Co2 Laser Marking

Laser Type	CO2,RF Metal Laser
Laser	CO2 Laser
Average /CW Output Power	30W/50W/100W/250W
Wavelength	10.6 micro meter
Guide Laser/Red Aiming Beam	Yes
Ambient Temperature	25 °C
Power Consumption	< 1 kW
Electrical Connection (Optional)	230v/50Hz – 115V/60Hz
Marking area (Optional)	Ø100/150/220/300/600
Repeatability	50 Micron
Resolution	18 Micron
Marking Speed	Up to 10000 mm/sec*

Fiber Laser marking machine

Fiber lasers also have a growing demand for industrial cleaning applications such as removing rust, paint, oxides, and other contaminants.

MLS metal laser marking machine is capable of engraving images, letters, logos, signs, barcodes, serial numbers and other means of identification on all materials. We offer you only the high quality metal laser marking machine at the best price you can ever find.

Specification:

Model Name/Number	Fiber Marking Machine
Laser Type	Fiber Laser
Marking Depth	As per Requirement
Operation Mode	Automatic
Brand	MLS
Automation Grade	Automatic
Power	20w/30w/ 50w/60w/120w/1kw/2kw
Marking Area	Customized
Wave length	1064nm

SUPER MINI UV Laser Marking Plastic

Main features is as below:

1) Class 1 design, with larger observation protective window.

2) Optional UV laser power: 5w, 8w, 10w, 15w, 20w, 25w, etc.

3) Compact and air cooling design, space-saving and cost-saving, etc.

4) 3D marking function and array marking function for multi work-pieces.

5) Optional functions: CCD visual marking, PDF, auto focus, disk rotation, etc.

6) Motorized up and down function of Z axis, removable doors and easy feeding.

7) Adopting 2.5 inch optical system, more larger working size and more finer spot size.

8) European safety standard, 24v low voltage power supply, with shutter and interlock switch.

9) Adopting 3 axis dynamic focusing technology, flat and irregular surface is easily being marked.

10) Adopting self-researched 3DLASER software, remote control and SDK is supported, upgradable.

AUTO TASTE UV LASER Mark Wineglass

Main features is as below:

1) Optional UV laser power: 3w, 5w, 8w, 10w, 15w, etc.

2) Class 1 design, with larger protective window and motorized Z axis.

3) Compact and water cooling design, space-saving and cost-saving, etc.

4) Optional functions: 3D scan, CCD visual marking, PDF, auto focus, disk rotation, etc.

5) European safety standard, 24v low voltage power supply, with shutter and interlock switch.

6) Adopting 3 axis dynamic focusing technology, flat and irregular surface is easily being marked.

7) Adopting self-researched 3DLASER software, remote control and SDK is supported, upgradable.

SUPER 3D Fiber Laser With Larger Marking Size

Main features is as below:

1) Mold manufacturing, air cooling, with simple and light weight design

2) Open frame large format fiber laser and optional laser power is 60w, 100w, 120w, etc

3) 3 axis dynamic focusing technology, marking flat and curve and irregular surface easily

4) Stable performance with multi-years lifespan, easy operating and maintenance, lifetime service

5) Optional functions: CCD visual marking, auto focus, safety cover, motorized Z axis, conveyor, etc

6) Standard marking size is 600*600mm and 1200*1200mm, 1500*1500mm is optional marking size

7) Adopting 50mm aperture 3D galvo head technology, more bigger working size and more precise quality

PS20 / PS60 Powder Storage

Construction

304 Stainless Steel
20L & 60L sizes available

Features
200mm removable top for cleaning
Customisable lid connections*
50mm tri-clamp connections
Forklift compatible
Suits standard 600 or 900mm
warehouse racking
Maximum 0.1 Bar Pressure

SU40 Sieving Unit

Features
a. Recycle, sieve and grade metal powders
b. Interchangeable standard sieves
c. Direct powder deposit into standard silos
d. All stainless-steel contact surfaces
e. Highly efficient powder processing
f. Sieve dosing handled automatically
g. Simple operation with variable setting

DU40 Decanter Unit

Features
a. Safe transfer of powder from bottles
b. Full inert environment
c. Fast bottle load and inert gas-down
d. Direct silo fill
e. All stainless-steel contact surfaces
f. Fast and easy decontamination
g. Suits AmPro Silos & other vessels
h. Twin glove-ports and ergonomic bottle handling

SP260 Metal 3D Printer

Slide Out Build Chamber
The SP260 build chamber is designed to decrease machine downtime caused by powder and part removal, whilst ensuring operator access for all machine related processes.

The design of the SP260 includes the ability of the build chamber to be drawn out of the machine and providing operators with essential access for powder and part removal.

SP100 Metal 3D Printer

Removable Build Cartridges
The build plate, powder supply and powder overflows of the SP100 are all designed as removable ‘cartridges’. This feature enables the rapid change-over that builds to ensure the printer can operate at the maximum ‘up-time’ without delay.

Precision Parts
The SP100 is capable of printing to very fine tolerances in a range of materials. CT scanner anti scatter grids are a prime example of the capabilities of AmPro 3D printers.

These anti scatter grids were printed with wall thicknesses of less than 0.1 mm, to an accuracy of 0.02 mm and density of ≥ 99%.

Find out how the SP100 can elevate your business today.

Large Format Denim Jeans Laser Marking Machine

Application

Large format denim jeans laser marking machine is a specially R&D denim jeans laser marking maching, aiming to the application needs for the denim jeans industry customers, can achieve mutiple denim applications and effects.

3D TASTE Laser Marking Machine

3D fiber laser cutting

Model	HyRobot C20
Mechanical arm span	2010mm
Output laser power	500-2000W
Working abutment	2000 x 2000 mm （ Fixed type）
Axis1	±160˚
Axis2	+147.5˚/-130˚
Axis3	±145˚
Axis4	±270˚
Axis5	+140˚/-115˚
Axis6	±360˚
Reposition accuracy	± 0.05mm（VDI/DGQ 3441）
Total power	11kw
Gross weight	3T
Overall dimension	7000x4000x3200mm

Solar Laser Welding

Solar thermal can reduce your water heating bills by 50 to 75%! It diminished harmful CO2 gasses and allows for an unlimited supply of safe, renewable energy. It is affordable, efficient, and reliable! Quality construction and smart design ensure that Flat Plate Panels meet the highest standards for reliability, heat output, and return on investment. Choose UWLASER’s laser welding system for the flat solar collector is a smart choice.

Welding Requirement

Welding part 1

Aluminium flat sheet, thickness is 0.35-0.5mm; max size is 3000mm*1000mm.

Welding part 2

Cooper Pipe, thickness is 0.45-0.7mm, the diameter is 8/10/12mm.

Advantage
1.Double station, double UW-300A, double laser head

2. Welding effiency：2000m*1000mm solar collector10-12pcs/H

3. The primary yield rate of the product ≥98%

4. Al sheet to Cooper pipe: tension test ≥700N (17 welding points)

5. Cooper sheet to cooper pipe: tension test ≥700N (7 welding points)

6. Not broke the Endothermic coating of the sheet.

7. Water pressure test 1.3MPa no leakage, while keeping the pressure for 5 min and no pressure drops.

Car Body Laser Welding

Laser welding is a welding technique used to join multiple pieces of metal through the use of a laser.

The beam provides a concentrated heat source, allowing for narrow, deep welds and high welding rates.

Advantages

High quality weld, precision welding, and high speeds (high throughput).
Access is not required on both sides of the parts to be joined.
Laser welding is a versatile: can weld carbon steels, HSLA steels, stainless steel, aluminum, and titanium; multiple layers of metals can be welded. Different weld patterns can increase stiffness.
Flangeless welding reduces car body weight; can be combined with laser cutting to further reduce car body weight.

MLS provides laser welding solutions from individual robotic cell to fully-automated system.

Solenoid Laser Welding

Same as sensor welding

Soft Pack Battery

Application Description
Applicable to soft pack battery specification

Length: 805mm

Width: 660mm

Height: 240mm

Industry testing standard

Weld width≥0.5mm

Weld length≥90% of the length of the tab

Tensile test, weld 10mm length failure tensile ≥20N (2kg)

Laser welding advantage

The primary yield rate of the product ≥99.8%

Capacity/efficiency;

Cell pretreatment: 20ppm

Stack processing section: 10ppm

Laser welded section: 40ppm

PACK assembly section: 80ppm

Feature

Realize the automation of product transportation from the cell, a module to PACK.

Cell polarity detection and flip, OCV/IR detection, NG blanking, folding hot edge, transfer polar ear and cutting, transfer aluminium sheet ultrasonic welding, bipolar ear and cutting, sweeping code cell.

The material supplied for the transmission line of the electric cell, cell glueing, foam feeding, heat sink glueing feeding, endplate feeding, module stacking, and plastic binding.

There’s nickel plate welding, installation bus-bar, polar ear-bending levelling, laser welding, post-welding detection and repair welding functions.

We also have sample line welding, wiring material and bronze installation.

Shell feeding, plug-in installation and wiring, module shell assembly, high pressure connection, EOL test, charge and discharge and airtightness test, test reinforcement package.

MES trace system functions, etc.

Eye Frame Laser Welding

Base on technology of automatic laser welding machine , which increase Z axis, it’s specialized for welding eyeglasses frame, the z axis will be fixed the eyeglasses frame and let it welding automatic by CNC a control system, high-speed welding, automatic control, precision working, mass the product will help you save more time.
Faster and better than traditional welding machine
Nice welding performance, high precision, saves cost
economical and affordable.
Good welding effect, welding firmly
Small heat affected area welding applicability.

Model LK-Y200 LK-Y300 Max.Laser Power 200W 300W Laser type YAG YAG Laser Wavelength 1064um 1064um Pulse width 0.1-4ms 0.1-4ms Pulse Energy 80J 120J Pulse Frequency 0-50HZ 0-50HZ Laser Welding Area 200*200mm 200*200mm Adjusting Range of Light spot 1.8mm 1.8mm Max. Bearing Of Standard Work Bench 25kg 25KG Repeating Precision of Work Bench -0.001 -0.001 Sighting Positioning system Microscope ,HD-CCD monitor system Microscope ,HD-CCD monitor system Cooling System Water cooling Water cooling Max. Output Power 200W 300W Power Supply AC220VAC/380VAC+-15%/50HZ/25A AC220VAC/380VAC+-15%/50HZ/25A Dimensions 1300*1100*1500mm 1300*1100*1500mm

Glovebox Laser Welding

Glove boxes provide a controlled inert atmosphere for manufacturing and assembly processes. Inert is a leading provider of Laser Glovebox Systems along with glove box accessories, including both integrated and retrofit gas purification units, process ovens, analyzers, vacuum equipment, and much more. Inert glove boxes with integrated laser welders can be used in a variety of applications including but not limited to…
The glove box for laser welding

In the knowledge that the ambient air is likely to alter the mechanical characteristics of the metals to be welded, laser welding in the glove box will allow you to operate in a safe atmosphere. In this enclosure, the welding area is surrounded by a shielding gas such as argon, helium or a mixture of these two gases in order to protect it.

The role of the glove box for welding
The gas purification unit controls the moisture and oxygen content in ppm to ensure that the strength and quality of the assembly comply with current standards. The role of the glove box is, therefore, to confine the area away from the air and prevent the propagation of these protective cases. There is a reduction in the heat-affected zone (HAZ), less coloration on the parts to be assembled, better mechanical resistance of the weld over time and greater precision. You avoid deformations while saving time. As a bonus, it becomes easier to weld the most difficult-to-access places or extremely thin surfaces with this equipment.

Robot Laser Welding

Ohio Laser has expanded its welding capabilities with the addition of a robotic fibre laser welding cell. Robotic laser welding offers many cost-saving advantages to the customer. It can reduce the overall weld time, decrease secondary processes (grinding, straightening, finishing) and eliminate the use of filler material. Laser welding increases weld tensile strength which creates a higher quality part or assembly.

Our laser welding team can provide custom engineered solutions for your parts and assemblies. We have an extensive background in welding and can take any GTAW (TIG) or GMAW (MIG) designed part and make minor modifications for better laser welding processing. Often, laser welding can replace bending operations for a higher quality, faster and more repeatable process. This technology not only increases throughput but also improves accuracy. Laser welding improves form, fit and function while reducing labour, increasing material utilization and improving the aesthetics of your part or assembly.

Working with laser welding experts at the MTC, Royal Enfield has successfully completed a program to improve consistency, increase throughput and reduce manual input in the manufacturing process. The laser welding cell at the MTC is equipped with a range of welding and cutting head options and is capable of handling large and heavy parts with ease – the laser processing head being carried on a 6-axis robot, which is integrated with a multi-axis manipulator.

Hybrid Laser Welding

Laser welding benefits:

The main benefits of the laser technology versus the previous welding processes are:

Higher productivity: Welding speed has increased between 4 to 8 times depending on the application.
Precise working: With exact placing of the energy spot. High repeatability.
Small focus spot diameter and higher power density on the workpiece with deep penetration welding.
High weld depth ratio: Through deep penetration welding.
Possibility of welding: Of complicated joint geometries and very different geometrically components.
Low total heat application: Resulting in minor microstructure changes and narrow heat-affected zone.
Generation of high aesthetic quality welds.
There’s Minimal thermal distortion of the workpiece.
It yields low post-weld operation times and costs.
Higher process flexibility due to large working distance with good accessibility.
The resistant capacity of storage closet hangers has been increased by 5% compared to the previous components welded with conventional welding processes. This is possible while reducing the welding cycle four times.

Scanner Laser Welding

Fundamental

With the Scanner Welding System, the laser beam of the solid-state laser is guided to the 3D laser scanner by means of a fibre optic cable and precisely directed to the component via the collimating, focusing unit and scanner mirrors that are integrated in the scanner. Highly dynamic galvanometer drives guarantee a short positioning time. Non-productive times are reduced to a minimum. This method is particularly suitable for 3-dimensional components, such as car front seats, car doors and other structural parts, which have a high number of joint connections

REMOTE LASER WELDING – SYSTEM TECHNOLOGY

We deliver system technology specially adapted to the remote laser welding process.
Highly dynamic rotary indexing tables in combination with a sophisticated, fast lock system ensure minimal downtime and thus extremely high laser ON times.
We attach particular importance to the regulated aeration and venting technology within the laser welding cell – another important component for a successful laser process.

Sensor Laser Welding

We have such experience on this project. Most customers choose automatic laser welding machines for solenoid valves. It can come true automatic welding working with a rotary axis. MLS has its own design team, where according to the customer product to do different fixture designs. Even it is fully automatic.

Another a distinct advantage of laser welding over other methods is that lasers can weld a greater variety of metals such as high strength stainless steel, titanium, aluminium, carbon steel as well as precious metals like gold and silver.
With laser welding, welds are much more accurate and finish is superior as is strength. The manufacturing process is therefore excellent for fine components and it can be used in areas where there is limited access. Lasers enable precision and quality were required for fine components.

Gasket Laser Welding

The cylinder gasket is round need to the fixture design does not affect the entire round of welding (without interruption);
Welding deformation control within 5mm.

Solution

Tips 1: Use suction tray and servo transmission mechanism to achieve the pick-and-place cylinder gasket, using double material inspection to confirm that the pick-up is a single piece;

Tips 2: Use circular heavy parts to press cylinder gasket and other mechanisms are withdrawn during welding to allow the welding space;

Tips 3: Fixtures are clamped in the circular weld seam; at the meanwhile adjust welding technology the parameter to reduce heat input.

Features

The uploading reminder system, it will remind the operator to upload product when finish welding;
The control system not only can control the components of the laser welding machine switch, laser output, protective air, but also functions of interlocking, alarm, and failure display;
The control system has maintenance testing and self-diagnosis programs; it has the function of displaying the type of fault;
Use four-position turntable, automatic uploading and unloading, which can achieve high production efficiency and small work site;
Double material inspection to detect accurate feeding;
Use scanner for high speeding welding.

System Including

This cylinder gasket laser welding system includes laser welding machine, chiller, smoke purifier, workstation, scanner, protective room, monitor, etc.

Railway Laser Welding

High brightness fibre lasers are enabling improved performance in many applications in automotive industry – even the more challenging, such as welding of zinc-coated steel.

In this webinar, we discuss how to select the most suitable laser technology for specific automotive applications, taking into account the latest developments and application techniques.

Both fiber and disk lasers offer numerous advantages, making them the preferred choice for powertrain welding applications. Besides the hard facts such as operating cost savings, energy efficiency, wavelength dependence, and improved process efficiency, they offer soft advantages like better compatibility with production lines, allowing more compact production line layouts. EMAG sees a strong trend towards fiber and disk lasers—to utilize the capabilities of this exciting technology best, though, other system components (welder, work holding, and automation) need to follow.

Gear Welding

High brightness fibre lasers are enabling improved performance in many applications in automotive industry – even the more challenging, such as welding of zinc-coated steel.

In this webinar, we discuss how to select the most suitable laser technology for specific automotive applications, taking into account the latest developments and application techniques.

Both fibre and disk lasers offer numerous advantages, making them the preferred choice for powertrain welding applications. Besides the hard facts such as operating cost savings, energy efficiency, wavelength dependence, and improved process efficiency, they offer soft advantages like better compatibility with production lines, allowing more compact production line layouts. EMAG sees a strong trend towards fibre and disk lasers—to utilize the capabilities of this exciting technology best, though, other system components (welder, work holding, and automation) need to follow.

Application Description

Auto parts such as cylinder gasket and others.
Standard
The welding point is smooth and color is symmetrical.
No damage or influence on the rest of the components during welding.
After the welding deformation of the product should be less than 5mm.
Advantage
Superior rate ≥99%
Welding speed: 70mm/s
Small deformation

Technology

Difficulties
1. The cylinder gasket is only 0.55mm need to achieve automatic uploading and unloading;

Pillow Laser Wedling

MLS Plate Weld is specially designed to weld dimple/ pillow plates. Pillow plates are heat exchanger panels in single embossed as well as double embossed format used for chillers, evaporators and cooling or heating tanks.

The MLS Plate weld can be equipped with a high power Fiber or a CO2 laser from Trumpf or Rofin/Coherent, both world-leading laser suppliers with an excellent reputation in performance and service. The Zenna Plateweld is equipped with one or two laser heads. With the use of two laser heads, the welding time is significantly reduced.

The MLS Plateweld support a plate-width of 1.500, 2.000 or 2.500 mm wide, the length is basically unlimited. For the transport of the pillow plate MLS supplies in and outfeed tables. For the heavier panels, we use motorized tables.

The system is designed in such a way that one operator can perform all necessary tasks.

Tailor Blank Welding

SYSTEMS FOR TAILOR-WELDED BLANK APPLICATIONS

Designed for high-output blank production and equipped with high power, high precision linear motors that drive the main laser welding focus head and all clamp motions, Wayne Trail’s linear and non-linear weld stations and systems outperform any other blank welder on the market.

When used with one of our precision-edge prep systems, these laser weld systems will produce production quality laser butt welds faster than normal weld speeds in most blank thickness combinations, including same-gauge applications because of the superior blank fit-up and reduced eject/reject rates. A stable weld environment and intimate fit-up provided by the edge prep process greatly enhances process monitoring capabilities.

Our laser weld gantries require minimal maintenance or setup. Extremely robust and durable, they are a welcome addition to the factory floor. CDRH Class 1 compliance is standard, as is the high-flow fume-evacuation-and-filtration system. This system increases the time between cleaning intervals, optimizing uptime and system availability.

Jewellery Welding

Description

The laser spot welding is an excellent tool for seam, butt and overlap welding of almost all common metals and their alloys. The wide range of tried and tested applications includes stainless steel, gold, silver, platinum and titanium, as well as shape memory alloys. Amongst these are some materials which are difficult, if not impossible, to join with conventional techniques.

Features

By matching the parameters and shape of the laser pulses to each material, the laser generates a minimal heat-affected zone, thus meeting the precondition for welding temperature-sensitive components. Another positive effect of the low thermal load of the two parts is that unwanted modifications of the joint by the welding process can almost always be avoided.

1. Human-based design accords with ergonomics, avoiding fatigue after long time working.

2. It doesn’t need to fill the solder, welding fast, the deformation of the workpiece is small.

3. Spot distributed evenly, beautiful appearance.

4. Unique YAG crystal cooling method to improve the beam quality and xenon lamp lifetime, reducing the use of cost.

5. The startup time is only 20 seconds, supporting software is easy to edit and operate

6. High-performance laser power supply, making a single pulse of high power, low power consumption and not hot when welding.

Advantage

Laser welded joints are of high strength and resist even high mechanical strain without any wear. Other than adhesive seals, they are temperature-resistant and show pore-free surfaces. Compared to other joining techniques, post-processing of laser weld is reduced to only a few simple steps, or can be ignored completely.

1. High-strength joints

Robust joints for high-strain work-pieces

2. Flawless surfaces

Pore-free, oxidation-free, no burn-off

3. Time and cost-efficient

No set-up times, short welding periods, minimal or no post-processing

4. Simple workpiece handling

Easy handling and fast operational readiness with extremely short training periods

5. Many different materials

Such as stainless steel, gold, silver, platinum, titanium, shape memory alloys

Application

K-Gold, brass, Stainless steel, and their alloys. It is mainly used for manufacturing and repairing jewellery, as well as precisely welding a variety of micro and heat-sensitive parts, just like nickel straps of batteries, hairsprings, watch components, down-leads of chips.

Laser spot welder is mainly used in jewellery and dental industry or other hardware field. This kind of machine can process all metallic material, which used for making jewelries such as gold, silver, platinum, titanium, palladium, K-Gold, Stainless steel, and their alloys. It is mainly used for manufacturing and repairing jewellery, as well as precisely welding a variety of micro and heat-sensitive parts, just like nickel straps of batteries, hairsprings, watch components, down-leads of chips.

Mold Welding

Summary information:

1. Laser welding spot diameter is small, heat affected area is small and pore, collapse, thermal strain and metallographic structure change will not occur after welding, greatly decreasing post-welding treatment process.

2. Microscope co-axis observing focusing positioning aiming, liquid crystal light valve and full reflection eye protection devices.

3. Stable operation, the ability to realize continuous working and intermittent working.
4. XYZ high rigid worktable, high repeated positioning precision.

5. It can effectively repair all cracks, chips and damages.

Application:

It is commonly applied to mold manufacturing industries including mobile phone, digital product, automobile and motorbike. And it can do repair welding to following substrates: various mold steel, stainless steel, beryllium copper, precious metal and extremely hard material (-HRC60).

Specifications

Model	SW-LMW150	SW-LMW200	SW-LMW300
Laser type	YAG pulsed
Max.output power	150W	200W	300W
Max.pulse energy	80J	100J	120J
Peak power	6KW	8KW	12KW
Pulse duration	0.3-20ms
Pulse frequency	0.1-30Hz	0.1-50Hz	0.1-100Hz
Focal diameter	0.1-2.0mm	0.1-2.0mm	0.2-2.0mm
Cooling system	External water cooling Internal cooling system optional
Vision system	10X Stereo microscope CCD carmer+Display optional
Workbench	X axis travel distance:200mm Y axis travel distance:150mm Z axis motor drive travel distance:350mm Loading ability:200kg XYZMotorized with joystick controller optional
Power supply	AC220V/1Ph/50Hz	AC220V/1Ph/50Hz	AC380V/3Ph/50Hz
Net weight	240kg	260kg	320kg

Cylindrical Battery Welding

Application Description

Suitable for 26650 cell end cover specification

Diameter: 26MM

Height: 3MM

Industry testing standard

Visually m

easure the surface smoothness without blasting pit

Drawing force≥15N

Laser welding advantage

Welding speed is 110~130mm/s

Product first rate ≥99%

Capacity/efficiency ≥100PPM

Soft Pack Battery

Application Description
Applicable to soft pack battery specification

Length: 805mm

Width: 660mm

Height : 240mm

Industry testing standard

Weld width≥0.5mm

Weld length≥90% of the length of tab

Tensile test, weld 10mm length failure tensile ≥20N (2kg)

Laser welding advantage

Primary yield rate of the product ≥99.8%

Capacity/efficiency ;

Cell pretreatment: 20ppm

Stack processing section: 10ppm

Laser welded section: 40ppm

PACK assembly section: 80ppm

Feature
Realize the automation of product transportation from cell, module to PACK.

Cell polarity detection and flip, OCV/IR detection, NG blanking, folding hot edge, transfer polar ear and cutting, transfer aluminum sheet ultrasonic welding, bipolar ear and cutting, sweeping code cell.

The material supplied for the transmission line of the electric cell,cell gluing, foam feeding, heat sink gluing feeding, end plate feeding, module stacking, plastic binding.

Nickel plate welding, installation bus-bar, polar ear bending leveling, laser welding, post-welding detection and repair welding functions.

Sample line welding, wiring material and bronze installation.

Shell feeding, plug-in installation and wiring, module shell assembly, high pressure connection, EOL test, charge and discharge and air tightness test, test reinforcement package.

MES trace system functions, etc.

Semiconductor Side Pump Laser Marking

Semiconductor pump series laser marker uses Galvanometer laser marking technology and most advanced semiconductor pump laser technology, makes the YAG rod generates a mass of inverted population with 800nm wavelength semiconductor laser diode pump Nd:YAG crystal, forms 1064nm wavelength giant pulse laser beam output under the effect of 0 switch, through expanding and focusing of laser beam, and finally realizes marking through controlling the deflection of galvanometer.

It is a revolution in laser marking field. This type of laser marker features low energy consumption, high electro-optic conversion efficiency, stable laser output mode, high reliability, small size, excellent marking effect and no consumables.

The marker is designed according to ergonomics, providing beautiful appearance and simple operation. All the important optic parts are imported from Europe and America. The optics system is in fully sealed structure. It has optics preview and focus indication function and provides reliable security for the 24-hour continuous working of the machine.

Features:

Multilingual software based on English
Full worldwide remote access via network
Customized log file to store all commands, processes and laser parameter
Separate modes for operators, supervisors and service
Programming in Visual Basic Script or via data import
Interfaces GDS II, STL, DXF
Addressing of up to 32 NC axes
Intuitive graphical operator interface with preview
Marking with single or double density codes complying
SEMI standards M12, M13 or according to customers definition

Laser source:

DPSS laser source
1064 nm, 532 nm (SHG)

Options:

Semi-automated or fully automated alignment with camera system
Automated workpiece handling
Vacuum chuck
Workpieces mount for 300 mm wafer
Purpose build mounts for masks
Customer-specific workpiece mounts
Fully air-conditioned processing chamber
Mini environment up to ISO class 4
Beam analyser featuring software

Specifications

S.No	Parameters Name	Parameters Data
1.	Max. laser average power	50W
2.	Beam quality	<6M2
3.	Laser wavelength	1064nm
4.	Repetition frequency	≤50KHz
5.	Cooling Mode	Water-cooling
6.	Standard marking area	100mm×100mm
7.	Marking area option	50mm×50mm, 150mm×150mm, 200mm×200mm, 300mm×300mm
8.	Marking depth	≤1.8mm
9.	Linear speed	≤7000mm/s
10.	Min. line width	0.01mm
11.	Min. character size	0.2mm
12.	Repetition accuracy	±0.002mm
13.	Power consumpted	≤1.5KW

Semiconductor End Pump Laser Marking

Semiconductor lasers are diodes which are electrically pumped. Recombination of electrons and holes created by the applied current introduces optical gain. Reflection from the ends of the crystal form an optical resonator, although the resonator can be external to the semiconductor in some designs.

Advantages:

High reliability
Long service life
High energy conversion efficiency
High light beam quality
Low power consumption
Semiconductor fully solid and air cooling device
Laser source and resonance cavity separated structure
Easy maintenance
Small size and convenient system integration

Specifications

S.No	Parameters Name	Parameters Data
1.	Max. laser average power	30W
2.	Repeat accuracy	0.001mm
3.	Laser wavelength	1064nm
4.	Repetition frequency	≤50KHz
5.	Cooling Mode	Water-cooling
6.	Standard marking area	100mm×100mm
7.	Marking area option	50mm×50mm, 150mm×150mm, 200mm×200mm, 300mm×300mm
8.	Marking depth	≤1.8mm
9.	Linear speed	≤7000mm/s
10.	Min. line width	0.01mm
11.	Min. character size	0.2mm
12.	Repetition accuracy	±0.002mm

Fiber Laser Marking

The optical fiber laser marker is the third generation laser marker system developed by our company with the most advanced technology in the world. It uses optical fiber laser to output laser and realizes marking function through high speed scanning galvanometer system. The optical fiber laser marker features high electro optic conversion efficiency, air cooling, small size, high quality output beam, high reliability, long service life and energy saving.

It can carve metal materials and certain nonmetal materials and is widely used in fields that have high requirement on depth, smoothness and fine, such as stainless steel mobile phone overlay, clock and watch, mould, IC, mobile phone keypad, etc. Bit map marking can carve beautiful pictures on the surfaces of metal and plastic, and the marking speed is 3-12 times of the speed of traditional first generation lamp pump marker and second generation semiconductor marker.

10W Air DPSS OEM in a new Nd:YVO4 laser marker system which can work on any type of metal and almost all industrial use plastics. The system consists of two parts: resonator unit-scnaeer head and power supply box and control. A 3 m optical fivre and signeal cable allow the power supply box to operate remotely. A notebook with the customs interface card and SLC (MLS LASER CONTROLLER).

Features:

Control: PC Windows with PCI or USB card, RS232 Software MLS Laser Controller
Interfaces: PLC, data network (ethernet), I/O digital, axis control, other auxiliary devices
Software: developed completely by MLS. Elaborates data or images to be marker and manages laser and all connected devices. Files can be imported in SVG, BMP, JPG, HTML, PLT.

Specifications

S.No	Parameters Name	Parameters Data
1.	Output power	10W @ 10KHz
2.	Wavelength	1064nm
3.	M2	≤1,8
4.	Max. marking speed	5000 mm/s
5.	Power supply	230V 50/60 Hz 1ph
6.	Absorbed power	550 W
7.	Beam source weight	5 Kgs
8.	Scanner head weight	3 Kgs
9.	Aiming beam	Red Diode Lase
10.	Marking area	65×65 mm and 110×110 mm

CO2 Laser Marking

Laser marking systems provide a galvo-steered beam designed for marking. The CO-Series laser marking systems are excellent for marking substrates like wood, glass, Plexiglas®, quartz, ceramics, fabrics, and other organic materials. Mark-On-The-Fly versions are available for application dependent line speeds up to 2700 ft/min. (900 meters per minute). Also available are embedded controller versions requiring no separate PC

Advantages:

The core optic components of the CO2 series laser marker are imported from America. The CO2 radio frequency laser and high speed scanning galvanometer imported from America provide reliable guarantee for the long time, continuous, high speed and stable work of the machine.
The CO2 radio frequency laser is a kind of gas laser and the laser wavelength is 10.64μm, which is in medium infrared frequency.
The CO2 laser has big power and high electro optic conversion efficiency.
It uses CO2 as the working substance, and fills the CO2 and other gases into the discharge tube. When high voltage is added to the electrode, glow discharge generates in the discharge tube and makes the gas molecules release laser. After expanding and focusing the released laser energy, the laser process is realized through deflection with scanning galvanometer. The marking software runs in WINDOWS platform and Chinese interface. It is compatible with the file formats of AUTOCAD, CORELDRAW and PHOTOSHOP, such as PLT, PCW, DIF, BMP, etc. It also can use SHK and TTF character libraries. Design graphs through computer. The operation is simple. The power is controlled by the software and adjustable.
Perfect for high resolution operations for the specialist marking of wood, plastics, paper, glass, foils and composite substrates
In-built 4 axis control, which is easily integrated into automated production systems or into one of Electrox’s stand-alone workstations
Extremely low operational cost and virtually maintenance free
Easy to use with minimum training and set-up requirements utilising user-friendly Windows™ software for guaranteed optimum marking performance

Specifications

S.No	Parameters Name	Parameters Data
1.	Laser Type	CO2
2.	Laser wavelength	1064nm
3.	Max. Pulse Frequency	50kHz
4.	Max. Marking Speed	5,000mms-1
5.	Operating Temperature	16°C – 35°C (Non Condensing)
6.	Max. Laser Average Power	30W, 55W
7.	Pulse Duration	20µs
8.	Power Stability	5%
9.	Beam Quality	>15mm.mrad
10.	Control Electronics	19 inch rack mounted (5U)
11.	Optical Unit Protection	IP52A
12.	Supply Requirement	5KW
13.	Max. Weight	56Kg

Lamp Pump Laser Marking

YAG laser is a kind of solid laser and the wavelength of the laser that it generates is 1064nm, which is in infrared frequency. It features high resonance efficiency, high output power and high stability. It is the most mature and mostly used solid laser. The lamp pump YAG laser uses the krypton lamp as the energy source and Nd:YAG as the medium (working substance) that generates laser.

The light of specific wavelength that the excitation source generates can promote the working substance to have level jump and release laser. After amplifying the released laser energy, the laser beam that can process materials is formed.

Benefits:

The lamp pump YAG series laser marker uses America high speed scanning galvanometer, British ceramic focus cavity and America laser rod, featuring high scanning precision, high speed and stable performance.
It can satisfy the requirement of long time continuous work and carve metal and nonmetal materials.
It is widely used in electronics, bearing, clock and watch, glasses, communication, electric apparatus, automobile parts, plastic keys, hardware tools, medical instruments, etc.

Specifications

S.No	Parameters Name	Parameters Data
1.	Laser wavelength	1064nm
2.	Laser repeating precision	≤50KHz
3.	Maximum laser power	50W
4.	Standard carving range	100mm*100mm
5.	Optional carving range	50mm*50mm
6.	Carving depth	<1mm
7.	Carving line speed	≤7000mm/s
8.	Minimum line width	0.015mm
9.	Minimum character	0.3mm
10.	Repeating precision	±0.003mm
11.	Power supply	220V/single/50Hz/20A
12.	Integrity power	5KW

Green Laser Marking

Solid-state (DPSS) green wavelength laser marking system. The laser beam and Q-switched pulse characteristics are optimized for applications that require high beam quality and stability. In addition, the EV4GDS offers extra power and speed for precision marking, and is the ideal choice for laser marking, scribing, trimming and other material processing applications. With an average diode life of greater than 20,000 working hours, the EV4GDS offers the user “best-in-class” reliability. The robust mechanical and optical design of the Telesis EV4GDS enables operation in an industrial environment where shock, vibration, and dust are a concern. Power Range: 4W

Specifications

S.No	Parameters Name	Parameters Data
1.	Laser wavelength	532nm
2.	Light beam quality	<2
3.	Power	5W/7W/9W
4.	Repeating frequency	0-100KHZ
5.	Carving range	70×70mm/ 100×100mm
6.	Carving line speed	≤7000mm/s
7.	Minimum character	0.15mm
8.	Repeating precision	±0.004
9.	Cooling method	Air cooling
10.	Power supply	220V/50HZ/10A

Mould Laser Welding

The working principle of this laser deposition welding system is to use laser high thermal energy and the melting technology in spot to process the welding and repairing of minute parts. It makes up the shortage of traditional hydrogen arc welding in repairing precision surfaces, avoids the two difficulties of thermal strain and after-treatment, and saves the production period of mould.

Applicable Industries:

The laser deposition welding system (laser mould welder) is specially designed for the mould industry and used in repairing of precision moulds, such as mould manufacture for digital products, mobile phone, toy, automobile and motorcycle, and molding industry. Through the repairing of moulds, it is possible to reuse the moulds, save the production cost and improve the working efficiency significantly. This technology can also be used to modify the design or size of moulds to reduce the development period.

Advantages:

With unique structure design, it is suitable for repairing of large, medium and small moulds.

Ceramic converging cavity is imported from the Britain. It is corrosion resistant and high temperature resistant, and has 8-10 years service life. The life of xenon lamp is more than 8 million times.
Use the most advanced light shielding system to eliminate the irritation to eyes by light during working.
The laser head and optics part can be rotated for 360° upward/ downward lifting and forward/ backward pushing, suitable for repairing of large, medium and small moulds.
The parameters are controlled by intelligent remote controller, which is simple and convenient.
The work bench can be lifted, and moved in three dimensions.
The size of light spot can be adjusted.

Specifications

S.No	Parameters Name	Parameters Data
1.	Types	Fixed Optical Bench/Hanging Arm/Fixed Optical Bench
2.	3-axis stroke of work bench	X=300mm, Y=200mm (X, Y can be adjusted manually and Z-axis can be lifted)
3.	Welding wire diameter	0.1mm ~ 0.8mm
4.	Pulse width	≤20ms, 0.2 ~ 25ms
5.	Maximum laser power	180W, 300W
6.	Bearing of work bench	≤200KG
7.	Power supply	220V≤10%/50Hz Or 380V≤10%/50Hz
8.	Laser Type	Nd:YAG pulse
9.	Adjusting range of light spot	0.1~0.3mm
10.	Size of light spot	0.2–3.0mm
11.	Laser wavelength	1064nm
12.	Pulse frequency	≤50Hz
13.	Laser output focus length	80mm/100mm/120mm(optional)
14.	Laser cooling	Water cooling
15.	Observing system	Microscope (360° adjustable)
16.	Protection gas	One line (xenon)

Electro Motor Welding

From welding of special gears for small batches of gearboxes, to rack-and-pinion steering gear, differentials, cylinder blocks, suspension arm strengthening ribs and advanced devices at the cutting edge of racing technology, you can depend on us to keep your team in pole position. We weld aluminum alloys, steel and titanium and resolve your high-tech welding issues. Prototype work is frequently undertaken.

Case 1: Titanium Hubs

A well known rally team manufactured a set of hubs for their car which were all but finished when the designers changed a diameter. Cars overcame the problem by adding a layer of titanium 64 all round the internal diameter for the hubs to be re-machined to the new dimension, resulting in no distortion or reduction in strength.

Case 2: Maxon Motors

Standard motors have straight plain output shafts, and need gears or actuators welding on. Laser welding is ideal for its accuracy in aligning the gear and welding it firmly in place, and the low heat input avoids damaging the motor. Cars weld front wing trim actuators and gear selector motors for various teams.

Specifications

S.No	Parameters Name	Parameters Data
1.	Wavelength	1064nm
2.	Max. Single pulse energy	60J 80J
3.	Average output power	60W 100W
4.	Focused spot diameter	0.20-1.5mm (Adjustable)
5.	Pulse width	1-20ms (Adjustable)
6.	Pulse frequency	1-20Hz
7.	Protective gas	One Route
8.	Power supply	220V 50Hz 4.5KW
9.	Dimension	8305601045mm

Laser Jewelry Spot Welding

The laser spot welding is an important aspect of laser process technology application. The spot welding process is thermal conduction, i.e. the laser radiation heats the surface of work piece, and the surface heat diffuses to the interior through thermal conduction and melts the work piece by controlling the width, energy, peak power and repeating frequency of laser pulse to form specific molten pool. Because of its unique advantage, it is widely used in the process of gold and silver jewelry and welding of mini and small parts.

Advantages

Very suitable to repair molds in all sizes. The adjustable range of power, pulse width, frequency and spot size is wide.
The technical data were adjusted by the controlling bar in the hermetic cavity
Easy to operate and high working efficiency
Keep on working up to 24 hrs, the performance of the whole machine is very stable
Prevent corrosion, the lifespan of the cavity can up to 8-10 years, and the lifespan of the xenon lamp can up to 8 million times.
Protection shelter can protect your eyes from the hurt of laser, with a humanistic design, comfortable for working.
All data can be adjusted by an intellectualized controller, easy and fast to operate.

Specifications

S.No	Parameters Name	Parameters Data
1.	Max. Laser Power	150W
2.	Laser working medium	Nd: YAG
3.	Laser Wavelength	1064nm
4.	Single Pulse Max Laser Power	60J
5.	Feedback Type	Current minus feedback
6.	Single Pulse Width	0.1ms-20ms
7.	Welding Depth	0.1-3mm (Depending on materials)
8.	Pulse Frequency	1-200HZ
9.	Positioning	Red light
10.	Cooling	Water Cooling
11.	Power Consumption	6KW
12.	Power Supply	Three phase 380V/50HZ
13.	Host dimension(WDH)	1000mm480mm1080mm
14.	Chiller dimension(WDH)	40mm660mm770mm

Hybrid Welding

Laser Hybrid welding is a type of welding process that combines the principles of laser beam welding and arc welding. The combination of laser light and an electrical arc into an amalgamated welding process has existed since the 1970s, but has only recently been used in industrial applications.

There are three main types of hybrid welding process, depending on the arc used: TIG, plasma arc or MIG augmented laser welding. While TIG-augmented laser welding was the first to be researched, MIG is the first to go into industry and is commonly known as hybrid laser welding.

Whereas in the early days laser sources still had to prove their suitability for industrial use, today they are standard equipment in many manufacturing enterprises. The combination of laser welding with another weld process is called a “hybrid welding process”. This means that a laser beam and an electrical arc act simultaneously in one welding zone, influencing and supporting each other.

Laser Hybrid process

For welding metallic objects, the laser beam is focused to obtain intensities of more than 1 MW/cm2. When the laser beam hits the surface of the material, this spot is heated up to vaporization temperature, and a vapor cavity is formed in the weld metal due to the escaping metal vapor. This is known as a keyhole. The extraordinary feature of the weld seam is its high depth-to-width ratio. The energy-flow density of the freely burning arc is slightly more than 100 kW/cm2. Unlike a dual process where two separate weld processes act in succession, hybrid welding may be viewed as a combination of both weld processes acting simultaneously in one and the same process zone. Depending on the kind of arc or laser process used, and depending on the process parameters, the two systems will influence each other in different ways.

The combination of the laser process and the arc process results in an increase in both weld penetration depth and welding speed (as compared to each process alone). The metal vapor escaping from the vapor cavity acts upon the arc plasma. Absorption of the laser radiation in the processing plasma remains negligible. Depending on the ratio of the two power inputs, the character of the overall process may be mainly determined either by the laser or by the arc.

Glovebox Welding

We manufacture & supply an excellent assortment of our Glove Box Welding Machines, which is widely accepted by our clients all across the globe. Our such range is fabricated from high grade material that makes it more reliable and durable. These machines are very efficient as they are built using advanced technology.

Gas Circulation Closed Loop Gas Recirculation Purifier Unit

Gas Purification System: Removal of H2O and O2
Attainable Purity (Inside Glove Box): H2O<1ppm(v), O2<1ppm(v)
Regeneration: The Purifier Unit is Regenerable
Procedure: Automatic Regeneration Program And Manual Control (HMI & PLC Controlled)
Regeneration Gas: N2/H2 mixture (H2:3-5%) or Ar/H2 mixture (H2: 3-5%)
Cooling: Water Cooling, 2-3 l/min
Circulation Unit: Integrated Blower, Flow rate: 70 m3/h at P=60 mbar
System Valving: Main Valves (For Circulation) Electro-pneumatic Valves, Type: KF 40
Control Valves: Magnetic Valves 3/8″, PLC controlled
System Piping: Main Piping Stainless Steel SUS304 Pipe, Type KF-40 flange system
Side Piping: 3/8″ Stainless Steel Pipe
Purifier unit and Components Leak Rate: <10-5mbar- l/s

Moisture and Oxygen Analytical Instruments

Trace Moisture Analytical Instruments

Pinpoint accuracy
Maintain frames’ natural color
H2O Range: 0-1000 ppm
High Capacitance type
Able to perform Calibration
Easy dismantle to use in other area
Sensor: In-line piping type
Moisture reading will display on HMI screen
Sensor flange: KF- 40

Oxygen Analytical Instrument

O2 Ranges: 0-1000ppm or 0-25%
Easy dismantle to use in other area
Sensor: In-line piping type
Oxygen reading will display on HMI screen
Sensor flange: KF- 40

Vaccum Antechamber

Loading Vacuum Antechamber:

SUS 304 Thickness 2mm, Circular Type Antechamber, 390mm dia, Length 600mm, Material Stainless Steel SUS 304 Thickness 3mm, Siding Tray: Stainless Steel SUS 304 Inside Surface Brushed Finish, Outside Surface Enameled, Grey. Doors: Material Aluminum, Anodized, Thickness 10mm. Door lock Spindle-Lock, Lifting Mechanism, with inner shelfs Pressure Gauge: Manometer Analog Display Valves: Automatic Valves(KF-25 Vacuum Line/3/8″ refill line) Vacuum/Refill: PLC Automatic Control

Mini Vacuum Antechambe:

Mini Antechamber, SUS 304, thickness 2mm, Length: 300mm, Diameter: 150mm

Leak Rate:

<10-5mbar- l/s

Applications

Laser Welding (Micro-wave Devices, Relay)
Science & Research
OLED/PLED Development Research
Batteries Development & Research
Lamp Development & Production
Pharmaceutical Applications
Nuclear
Position Sensitive X-Ray Detection

Specifications

S.No	Parameters Name	Parameters Data
1.	Laser power	75 Watts
2.	Beam delivery	2 way energy share
3.	Control	industrial pc
4.	Drive	Servo Motor
5.	Travel	300mm x200mm x 100mm
6.	Function	Heat Absorbing Glass
7.	Technique	Glass
8.	Thickness	2mm, 3mm
9.	Usual Size	50108mm, 30110mm, 90110mm, 18110mm, 50*100mm
10.	Size Tolerance	+/- 0.05mm
11.	Color	Clear, Black, Green, Gold
12.	Material	Glass, PVC, ABS
13.	Irt	700-1300um
14.	UV Transmittance	313nm
15.	Usage	Electric Welding

Fuel Tank

Electronic Laser Welding

Mold Welding

Jewellery Welding

Tailor Blank Welding

Pillow Laser Wedling

Solar Laser Wedling

Gear Welding

Railway Laser Welding

Gasket Laser Welding

Sensor Laser Welding

Scanner Laser Welding

Hybrid Laser Welding

Robot Laser Welding

Glovebox Laser Welding

Eye Frame Laser Welding

Solenoid Laser Welding

Soft Pack Battery

Electronic Laser Welding

Automotive Laser Welding

Car Body Laser Welding

Cylindrical Battery Welding

Handheld Laser Welding Machine

Kitchenware Laser Welding

MARUTI SUZUKI

ROYAL ENFIELD

Get Guide to Strategic Planning Today